Thursday, February 6, 2025

Building the Tub

The tub or base of the camper is the part which will slide into the bed of the truck. the floor is 1” foamboard insulation sandwiched between sheets of 1/4” plywood and secured with Titebond II glue and screws.

The walls of the tub are 1/2” plywood
I am building it in my garage so I have to plan and measure carefully so it won’t be too tall to remove it.





at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Photos of progress

Completing Framing and Applying Plywood  Plywood skin complete. Adding poor man’s fiberglass. Preparing to load on the truck Loaded. There i...

  • Poor Man’s Fiberglass
     Applying Poor Man’s Fiberglass The application consists of using Titebond II glue to apply Landscape fabric. Several more layers of glue ar...
  • Framing Completed
    Now that the frame is completed I have been applying the exterior plywood which is glued to foamboard insulation. This gives the structure g...
  • Building the Tub
    The tub or base of the camper is the part which will slide into the bed of the truck. the floor is 1” foamboard insulation sandwiched betwee...